Houston-based George Metals is a reliable producer and distributor of **440C Stainless Steel Round Bars and Rods**, providing high-strength, wear-resistant stainless steel solutions for challenging industrial and engineering needs. Due to its high carbon content and excellent hardness after heat treatment, 440C stainless steel is well suited for the production of precision components that are both strong and corrosion-resistant. George Metals manufactures these rods and bars to tight dimensional tolerances and high-quality surface finish, to serve aerospace, defense, medical, tooling, and automotive markets that use higher mechanical properties and endurance in severe operating conditions.
**Stainless Steel 440C Round Rods and Bars** consist of around 16–18% chromium, 0.95–1.20% carbon, and traces of manganese, silicon, molybdenum, and phosphorus. This martensitic stainless steel has a high carbon content and has excellent hardness and abrasion resistance. Mechanical properties are tensile strength of 760–1000 MPa, yield strength of 450–600 MPa, and superior hardness up to 58–60 HRC upon heat treatment. The product, **Stainless Steel 440C Round Bars and Rods**, has high strength, moderate corrosion resistance, and excellent edge retention and is suitable for parts that will be subjected to abrasion, impact, and mechanical stress.
Stainless Steel Round Bar Specification : ASTM A276 / A479, ASME SA276 / A479
Dimension Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size : 14mm-300mm
Thickness : 50 mm to 6000 mm Long
Length : 1 To 6 Meters, Custom Cut Length
Form : Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc.
|
SS 440C |
Min |
Max |
|---|---|---|
|
Si |
– |
1.00 |
|
C |
0.95 |
1.20 |
|
Mo |
0.00 |
0.75 |
|
P |
– |
0.04 |
|
Ni |
– |
1.00 |
|
Mn |
– |
1.00 |
|
Cr |
16.00 |
18.00 |
|
S |
0.15 |
0.03 |
|
Element |
SS 440C |
|---|---|
|
Tensile (UTS)N/mm² |
1965 |
|
Temp°C |
20 |
|
Reductionof Area |
10 |
|
Elongation(50.8mm) %) |
2 |
|
0.2% YieldN/mm² |
1896 |
|
HardnessHRc |
57 |
|
STANDARD |
UNS |
WERKSTOFF NR. |
JIS |
|---|---|---|---|
|
SS 440C |
S44004 |
1.4125 |
SUS 440C |
Type | SIZES (Inches) | ISO Tolerance | SIZES (mm) |
|---|---|---|---|
Peeled and Polished | 1.50″ to 6.00″ | h11-DIN 1013 | 40.00 to 150.00 |
Cold Drawn and Ground | 5/6″ to 2.50″ | h9-h8-h11-h10 | 10.00 to 75.00 |
Cold Drawn and Polish | 1/8″ to 3.00″ | h9-h8-h11-h10 | 3.00 to 75.00 |
Peeled and Ground | 3/4″ to 2.00″ | h10-h9-h11 | 20.00 to 50.00 |
Cut to size on request (tolerance +2/-0 mm). 440C Stainless Steel Bars Standard lengths of 2000 mm up to 6000 mm.
50.0 | 6.0 |
45.0 | 5.0 |
60.0 | 8.0 |
55.0 | 7.0 |
70.0 | 10.0 |
65.0 | 9.0 |
75.0 | 12.0 |
90.0 | 20.0 |
80.0 | 16.0 |
100.0 | 25.0 |
160.0 | 35.0 |
130.0 | 30.0 |
200.0 | 40.0 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
