George Metals of Houston, USA, is a premier manufacturer and supplier of **410 Stainless Steel Rectangular Bars**, providing high-quality, heat-treatable stainless steel items for a broad spectrum of industrial purposes. 410 Stainless Steel is a martensitic grade acknowledged for good strength, hardness, and fair corrosion resistance. George Metals manufactures these rectangular bars with accurate dimensions, smooth surface finish, and consistent quality. Suits structural and mechanical application, 410 rectangular bars are extensively used in industries like oil and gas, aerospace, power generation, and general engineering, wherein strength, machinability, and abrasion resistance are critical.
**410 Stainless Steel Rectangular Bars** consist of roughly 11.5–13.5% chromium and up to 0.15% carbon, with minor amounts of manganese, silicon, phosphorus, and sulfur. This make-up permits hardening by heat treatment while allowing medium-level corrosion resistance. The mechanical properties are tensile strength of 650–850 MPa, yield strength of 275–500 MPa, and hardness of up to 40 HRC after treatment. The product, **Stainless Steel 410 Rectangular Bars**, can be used in components that have high strength, wear resistance, and moderate corrosion protection, particularly in mildly corrosive environments and high-load conditions.
Stainless Steel Rectangular Bar Specification : ASTM A276 / A479, ASME SA276 / A479
Dimension Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size : 14mm-300mm
Thickness : 50 mm to 6000 mm Long
Length : 1 To 6 Meters, Custom Cut Length
Form : Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc.
| Element | S | Cr | Si | C | P | Mn | Ni |
| SS 410 | 0.030 | 11.5-13.5 | 1.00 | 0.15 | 0.040 | 1.00 | 0.75 |
| Elongation | Melting Point | Yield Strength (0.2%Offset) | Density | Tensile Strength |
| – | – | MPa – 275 | – | MPa – 480 |
| STANDARD | UNS | BS | EN | JIS | WERKSTOFF NR. | GOST | AFNOR |
| SS 410 | S41000 | 410S21 | 56A | SUS 410 | 1.4006 | – | – |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
