Varun Sheets and Plates is a leading manufacturer and supplier of stainless steel products in Dubai, UAE, that specializes in providing high-quality materials with international standards. Among their high-end products are Stainless Steel 347 Bars/Rods, which are highly esteemed for their superior corrosion resistance and high-temperature strength. With rigorous emphasis on accuracy, durability, and customer satisfaction, Varun Sheets and Plates meets the needs of various industries like petrochemical, aerospace, and power generation. With its quality compliance and guaranteed supply, they are an ideal partner for stainless steel solutions in the Middle East region and beyond.
Stainless Steel 347 Bars/Rods consist primarily of 17–19% chromium and 9–13% nickel content with columbium (niobium) added for stabilization to resist intergranular corrosion. These rods provide tensile strength of around 515 MPa, yield strength of 205 MPa, and elongation of around 40%. Famous for superior creep strength and oxidation resistance at elevated temperatures, Stainless Steel 347 Bars/Rods retain structure in harsh environments. Their weldability and durability qualify them for use in situations demanding exposure to heat and corrosive substances for extended periods.
Standard Specification : ASTM A276, ASTM A479, ASTM A182
Specification : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 347 Bright Bars : Outside Diameter in the range of 4mm to 200mm
SS 347 Round Bars : Outside Diameter in the range of 4mm to 500mm
SS 347 Flat Bars : 1 / 2” to 10” in thickness range of 1.6mm to 150mm, Custom Size Stainless Steel Flats available
SS 347 Square Bars : 3mm – 100mm
SS 347 Hex Bars : 4mm – 101.6mm
Length : 1 to 6 Meters, Custom Cut Lengths
Finish : Matt Finish, Bright Polished, Black, NO.4 Finish, Rough Turned, BA Finish
Our SS 347 Round bars conforms to NACE MR0175/ISO 15156
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
| Grade | Mn | C | P | Si | Cr | S | Ni | Co + Ta | Fe |
| SS 347 | 2 maximum | 0.08 maximum | 0.045 maximum | 0.75 maximum | 17 – 20 | 0.03 maximum | 9 – 13 | 10xC min 1.00 maximum | 62.74 |
| Elongation | Density | Tensile Strength | Melting Point | Yield Strength (0.2%Offset) |
| 40 % | 8 g/cm3 | MPa – 515, Psi – 75000 | 1454 °C (2650 °F) | MPa – 205, Psi – 30000 |
| STANDARD | UNS | AFNOR | WERKSTOFF NR. | BS | JIS | GOST | EN |
| SS 347 | S34700 | – | 1.4550 | – | SUS 347 | 08Ch18N12B | X6CrNiNb18-10 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
