Varun Sheets and Plates is a premier Stainless Steel manufacturer and supplier of high-quality stainless steel solutions in Dubai, UAE, providing top-grade Stainless Steel 310S Bars and Rods. Known for their toughness, durability, and resistance to high temperatures, the products are designed for operations in extreme industrial conditions. Focused on international quality standards, accuracy engineering, and prompt delivery, Varun caters to various industries such as petrochemical, heat treatment, and power generation. Reputed for reliability and customer dedication, the company is a foremost selection for stainless steel bars and rods in the UAE as well as the Middle Eastern region.
Stainless Steel 310S Bars and Rods consist of around 25% chromium and 20% nickel with low carbon levels (max 0.08%) to increase corrosion resistance as well as weldability. Austenitic stainless steels of these provide good oxidation as well as scaling resistance at elevated temperatures. Mechanical properties comprise tensile strength of approximately 520 MPa and yield strength of approximately 205 MPa. The item—Stainless Steel 310S Bars/Rods—is crafted for strength, heat resistance, and prolonged service life and is made in various diameters and finishes to meet industrial requirements.
Standard : ASTM A276, ASTM A479, ASTM A182
International Specification : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 310S Hex Bars : 4mm – 101.6mm
SS 310S Square Bars : 3mm – 100mm
SS 310S Bright Bars : Outside Diameter in the range of 4mm to 200mm
SS 310S Flat Bars : 1 / 2” to 10” in thickness range of 1.6mm to 150mm, Custom Size Stainless Steel Flats available
SS 310S Round Bars : Outside Diameter in the range of 4mm to 500mm
Length : 1 to 6 Meters, Custom Cut Lengths
Our SS 310S Round bars conforms to NACE MR0175/ISO 15156
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310S | 0.08 max | 2 max | 1.50 max | 0.045 max | 0.030 max | 24 – 26 | – | 19 – 22 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310S | 1.4845 | S31008 | SUS310S | – | 20Ch23N18 | – | X8CrNi25-21 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
