Brian Fasteners, Houston, USA-based, provides superior quality Nitronic 33 bars and rods with the aid of advanced manufacturing and metallurgical processes. The products of Nitronic 33 from the company have superior strength and resistance to corrosion, particularly in sour and chloride environments. Through controlled finishing, deformation, and melting, they maintain tight dimensional tolerances and high-quality surface finish. To industries like marine, oil & gas, desalination, and chemical processing, Brian Fasteners provides flexible sizing, rapid supply, and technical advice from experts. Brian Fasteners Nitronic 33 rods and bars reflect the firm’s dedication to specialty alloys in demanding industrial environments.
Nitronic 33 is an austenitic stainless steel alloy with 17–19% chromium, 3–5% manganese, 0.07–0.25% nitrogen, and nominal nickel (~0.5%). No molybdenum content is present. This alloy possesses tensile strength of 800–1,200 MPa, yield strength of 450–850 MPa, and elongation of usually 30–60%. High chromium and nitrogen content provides excellent resistance to chloride stress corrosion cracking and general corrosion. It has mechanical stability in up to about 650 °C temperature and also maintains good toughness even at cryogenic temperatures.
| Grade | Nitronic 30 Round Bar |
|---|---|
| Specification | DIN, JIS, ASTM, BS, ASME, AISI |
| Nitronic 30 Square bar size | 4 to 100mm |
| Nitronic Alloy 30 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Nitronic UNS S20400 Hex Bar size | 2-100mm A/F |
| Nitronic 30 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Nitronic Alloy 30 Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Nitronic UNS S20400 Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Nitronic 30 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Nitronic Alloy 30 Section | 3.0 to 12.0mm thickness |
| Nitronic UNS S20400 Round bar size | Diameter: 3-~800mm |
| Nitronic 30 Billet Size | 1/2″ to 495mm Diameter |
| Nitronic Alloy 30 Round Bar Standard Dimensions | Diameter / Height: |
| Nitronic 30 Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Nitronic Alloy 30 Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Nitronic UNS S20400 Technique | Nitronic 30 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Nitronic 30 Condition | Hardened & tempered, annealed |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Form | Nitronic 30 Round, Rod, T-Bar, Nickel Alloy Channel Bar, Precision Ground Bar, Nickel Alloy Flat Bar, Nickel Alloy Square Bar, Nickel Alloy Blocks, Nickel Alloy Round Rod, Nickel Alloy Rings, Nickel Alloy Hollow, Nickel Alloy Triangle, Rectangle, Hex (A/F), Nickel Alloy Threaded, Half Round Bar, Profiles, Nickel Alloy Billet, Nickel Alloy Ingot, I/H Bar, Forging etc. |
| Processing | Bar cutting to 650mm |
| Our Nitronic 30 Round bar conforms to NACE MR0175/ISO 15156 | |
| Grade | C | Mn | S | Si | N | Ni | Cr |
| Nitronic Alloy 30 | 0.030 | 17.0 – 15.0 | 0.030 | 1.00 | 0.30 – 0.15 | 3.00 – 1.50 | 17.00 – 15.00 |
Ultimate Tensile, min. | Yield Strengtd (0.2% OS) min. | Elong. in 2 in., or 50mm, min., % | R/A | Hardness, max. | |
Min | 95 KSi | 48 KSi | 35 |
| |
Max | 241 Brinell | ||||
Min | 655 MPa | 330 MPa | |||
Max | 100 Rockwell B |
| STANDARD | UNS | DIN |
|---|---|---|
| Nitronic 30 Round bar | S20400 | – |
Nitronic 33 rods are available in various sizes, typically from 1/8" to 12" in diameter. Finishes include cold drawn, hot rolled, and ground, offering smooth or rough surface finishes.
Yes, Nitronic 33 bar can be welded using standard welding processes such as TIG or MIG. Proper preheating and post-weld heat treatment may be required for optimal results.
Suitable welding processes for Nitronic 33 Bar include TIG (Tungsten Inert Gas), MIG (Metal Inert Gas), Stick welding (SMAW), and Submerged Arc Welding (SAW), using appropriate filler materials.
Brian Fasteners‘ Nitronic 33 bars and rods are well suited for corrosive and aggressive conditions. They find applications in chemical processing plants for piping, valves, and separators dealing with chloride-laden or acidic fluids. In the marine and offshore sectors, they find use in seawater systems and desalination plants. Oil and gas industries apply them in downhole tools, wellhead components, and subsea structures resisting chloride stress corrosion. Their robust corrosion and mechanical properties also suit power generation, nuclear, and environmental treatment systems. Brian Fasteners’ Nitronic 33 bars ensure durable performance where specialty alloy reliability is critical.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
