Brian Fasteners, based in Houston, USA, is the expert in Nimonic C263 bars and rods that undergo vacuum melting, precise forging, and aging. This nickel-based superalloy offers excellent creep and oxidation resistance, especially at high temperatures. Strict quality checks provide exacting tolerances and metallurgical consistency. Supplying aerospace, gas turbine, and petrochemical industries, Brian Fasteners provides special bar sizes, timely delivery, and engineering support. Being a reliable source, the organization supplies critical applications with Nimonic C263 bars for rigorous structural performance in high-temperature conditions for various American industries.
Nimonic C263 contains approximately 60% Ni, 15% Cr, 10% Co, 1–2% Al and Ti, and carbon <0.1%. It has tensile strength of 900–1,400 MPa, yield strength 600–1,000 MPa, and elongation 15–25%. The alloy shows creep resistance up to 750 °C and excellent oxidation performance. Precipitation of gamma-prime promotes high-temperature strength, and chromium and alumina-formers impart corrosion protection. Nimonic C263 has a combination of creep and oxidation resistance for structural application in engine and turbine systems.
Dimension : EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade : Nimonic C263 Round Bars
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Application : Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining
Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
Our Nimonic Alloy C263 Round Bars conforms to NACE MR0175/ISO 15156
| Nimonic Alloy 263 | 0.04-0.08 | 19 – 21 | 19 – 21 | 1.90 – 2.40 | 0.60 max | 0.40 max | 0.20 max | 0.60 max |
| Tensile strength | ISO 6892-1:2009(B) Annex D | 900 ± 40 MPa | 1100 ± 30 MPa |
| Yield strength (Rp 0.2 %) | ISO 6892-1:2009(B) Annex D | 650 ± 40 MPa | 800 ± 30 MPa |
| Elongation at break | ISO 6892-1:2009(B) Annex D | 40 ± 5 % | 35 ± 5 % |
| Young’s Modulus | – | 220 ± 15 MPa | 220 ± 15 MPa |
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Nimonic Alloy 263 | 2.4650 | N07263 |
Common diameters for Nimonic C263 rods range from 3mm to 200mm, with popular sizes including 6mm, 12mm, 25mm, 50mm, and 100mm. Custom sizes are also available upon request.
Nimonic C263 rods are available in sizes ranging from 3mm to 250mm in diameter. Common finishes include hot-rolled, cold-drawn, and polished, offering versatility for various applications.
Yes, Nimonic C263 bar can be welded. It is typically welded using gas tungsten arc welding (GTAW) or gas metal arc welding (GMAW) with a matching filler material for optimal results.
Brian Fasteners‘ Nimonic C263 bars and rods are utilized in gas turbine discs, combustion liners, and hot-section fasteners. Their high-temperature ability supports aerospace components such as engine supports and structure brackets. Industrial furnace systems utilize them as load-bearing fixtures and fasteners. Petrochemical high-temperature reactor and piping systems take advantage of their heat resistance. These bars are manufactured to exact metallurgical and dimensional specifications for critical hot-section applications. Brian Fasteners delivers Nimonic C263 bars to strict engineering specifications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
