Brian Fasteners, Houston, USA-based manufacturer, produces Nimonic 75 bars and rods through controlled vacuum melting, hot working, and aging processes. This nickel superalloy provides balanced high-temperature strength and oxidation resistance. Every bar receives accurate dimensional control and metallurgical inspection. Serving aerospace, power generation, and industrial heating industries, Brian Fasteners provides custom length, on-time delivery, and technical support. As an alloy expert with whom customers can rely, the organization maintains consistent quality Nimonic 75 bars and rods for components operating in harsh thermal conditions in American industry applications.
Nimonic 75 has about 60% Ni, 20–22% Cr, 10% Co, with ~1% Al and Ti, and carbon <0.1%. After aging, tensile strength is 900–1,300 MPa, yield strength 600–950 MPa, and elongation 15–25%. Creep resistance is maintained up to 700 °C. Oxidation protection is provided by chromium and aluminum, and gamma-prime precipitation improves high-temperature strength. Nimonic 75 is designed for robust structural performance in hot conditions.
Dimension : EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade : Nimonic 75 (UNS No. N06075) Round Bars
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Application : Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining
Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
Our Nimonic Alloy 75 Round Bars conforms to NACE MR0175/ISO 15156
| Grade | C | Ni | Cu | Cr | Ti | Fe | Mn |
|---|---|---|---|---|---|---|---|
| Nimonic Alloy 75 | 0.08 / 0.15 | Bal | 0.5 max | 18.9 – 21.0 | 0.2 / 0.6 | 5.0 max | 1.0 max |
| Density | Modulus of Elasticity | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.37 g/cm3 | GPa – 206 | MPa – 750 | MPa – 275 | 42 % |
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Nimonic Alloy 75 | – | N06075 |
Yes, Nimonic 75 bars can be recycled after use. They are composed of valuable nickel-chromium alloys, making them suitable for recycling to recover and reuse their high-performance material properties.
Yes, Nimonic 75 Bar can be welded using TIG or MIG welding methods. Proper preheating, post-weld heat treatment, and the use of matching filler materials are essential for success.
Nimonic 75 rods are available in various sizes, typically ranging from 0.125" to 6" in diameter. Common finishes include cold drawn, hot rolled, and polished, depending on application needs.
Brian Fasteners‘ Nimonic 75 rods and bars are utilized in turbine disks, blades, shafts, and combustion hardware in high-temperature systems. They work in support fixtures of industrial furnaces and hot-section fasteners. Aerospace and power-generation components depend on their thermal stress-strength and stability. Their metallurgical properties render them appropriate for rotating and structural components in harsh service. Brian Fasteners offers Nimonic 75 bars designed for high-performance requirements in hot sections in high-reliability applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
