Copper Nickel Bars and Rods

Brian Fasteners, located in Houston, USA, manufactures and supplies high-quality Copper Nickel Bars and Rods. These bars are known for their strong corrosion resistance, especially in seawater and marine environments. They are commonly used in offshore, shipbuilding, and industrial systems. Copper Nickel alloys offer great strength, weldability, and thermal conductivity. Brian Fasteners provides Copper Nickel Bars and Rods in different grades and sizes, ensuring precise tolerances, full material traceability, and timely delivery. Their products suit clients looking for reliable non-ferrous metals for key heat exchanger, piping, and structural uses.

Cupro Nickel Bars Exporter in California, Cupro Nickel Square Bar Stockist in Houston, Copper Nickel Hex Bar Supplier in USA, ASME SB111 Cupro Nickel Rectangular Rod Distributor in Texas, Copper Nickel Alloy Hex Rod Stockist in Texas ,Cupro Nickel Square Rod Price in California, Cu-Ni Bars in USA, Copper Nickel Forged Bar Manufacturer in Houston, Cu-Ni Polish Flat Bar Supplier in Texas, CuNi Alloy Cold Drawn Round bar Supplier in United kingdom

Copper Nickel Cold Drawn Bars

Cu-Ni Bright Rods

Cu-Ni Alloy Threaded Rods

Copper Nickel Bars and Rods typically contain 90% to 70% copper and 10% to 30% nickel, depending on the grade (e.g., 90/10 or 70/30). Other elements like iron and manganese enhance their strength and resistance to erosion and corrosion. These bars have a tensile strength ranging from approximately 300 to 500 MPa, yield strength around 100 to 250 MPa, and elongation between 30% and 45%. They are non-magnetic, resist fouling, and perform well in high-salinity or brackish water conditions. Their stability and high ductility make them ideal for forming, welding, and long-term use in marine systems.

Cupro Nickel Bright Bar Manufacturer in Houston, ASME SB 111 Cupro Nickel Alloy Flat Bar Supplier in USA, Cu-Ni Flat Bar Price List in Houston, Stockist of Copper Nickel Square Bar in Houston, Cu-Ni Bars and Rods Exporter in West Houston, Cu-Ni Alloy Rectangular Bar Exporter in USA, Cu-Ni Hot Rolled Round Bar Exporter in Texas, Cu-Ni Cold Drawn Bars Manufacturer in California, Cu-Ni Black Bar Stockists in USA, High Quality Copper Nickel Rods Dealer in West Houston

Copper Nickel Bars and Rods Specification

Standards	ASTM B151 / ASME SB151
Dimensions	EN, DIN, JIS, ASTM, BS, ASME, AISI all International Standards
Diameter	Outside Diameter in the range of 4mm to 500mm
Width	1m to 48″
Hex Bars	18mm – 57mm (11/16″ to 2-3/4″)
Square Bars	18mm – 47mm (11/16″ to 1-3/4″)
Flat Bars	1/2” to 10” in the thickness range of 2mm to 150mm
Wire Length	Max 12000 mm
Wire Diameter	5.5 – 400 mm
Length	1 to 6 Meters, Custom Cut Lengths
Types	Round, Square, Hex (A/F), Flat, Square, Rectangle, Billet, Ingot, Forging, Wire Bobbin, Wire Spool, Wire Rope, Spring Wires, Welding Wire, Coiled Wire Etc.

You Need Our Support, to Have Any Projects?

Test Certificate

Why George Metals?

Packaging

Copper Nickel Bars and Rods Sizes

Metric		US Rods		ASTM/ Canadian		Japanese
Rods Size	Diam. (mm)	Rods Size	Diam. (Inch)	Rods Size	Diam. (mm2)	Rods Size	Diam. (mm)
5	5	#2	0.250	10M	100	6	6
5.5	5.5	#3	0.375	15M	200	10	10
6	6	#4	0.500	20M	300	13	13
7	7	#5	0.600	25M	500	16	16
8	8	#6	0.750	30M	700	19	19
9	9	#7	0.875	35M	1000	22	22
10	10	#8	1.000	45M	1500	25	25
11	11	#9	1.125	55M	2500	29	29
12	12	#10	1.250			32	32
14	14	#11	1.375			35	35
16	16	#12	1.500			38	38
18	18	#13	1.600			41	41
20	20	#14	1.750			44	44
22	22	#15	1.875			48	48
25	25	#16	2.000			51	51
28	28	#18	2.250			57	57
32	32
36	36
40	40
44	44
50	50

Copper Nickel Bars and Rods Weight Chart

Size	Kgs / Foot	Kgs / Mtr	Size	Kgs / Foot	Kgs / Mtr	Size	Kgs / Foot	Kgs / Mtr
3mm	0.017	0.055	20mm	0.753	2.470	3″	10.900	35.762
1/8″	0.019	0.062	22mm	0.908	2.979	3-1/4″	12.800	41.996
5/32″	0.029	0.095	7/8″	0.926	3.038	3-1/2″	14.850	48.772
4mm	0.030	0.098	24mm	1.080	3.543	3-3/4″	17.001	55.780
3/16″	0.043	0.141	25mm	1.180	3.871	4″	19.306	63.340
5mm	0.047	0.154	1″	1.210	3.970	4-1/4″	21.908	72.249
7/32″	0.058	0.190	26mm	1.271	4.170	4-1/2″	24.4487	80.340
6mm	0.068	0.223	27mm	1.368	4.490	4-3/4″	27.366	90.249
1/4″	0.076	0.249	1-1/8″	1.534	5.033	5″	30.461	99.940
7mm	0.091	0.298	30mm	1.691	5.548	5-1/2″	36.690	121.000
5/16″	0.118	0.387	1-1/4″	1.924	6.349	6″	43.860	143.900
8mm	0.120	0.398	32mm	1.894	6.314	6-1/2″	51.093	167.630
9mm	0.152	0.498	1-3/8″	2.303	7.550	7″	59.432	196.000
3/8″	0.170	0.557	35mm	2.390	7.553	7-1/2″	68.226	225.000
10mm	0.189	0.620	36mm	2.438	7.999	8″	77.586	254.55
11mm	0.228	0.748	38mm	2.792	8.903	10″	121.048	397.140
7/16″	0.232	0.761	1-1/2″	2.715	8.951
12mm	0.271	0.889	40mm	3.009	9.872
1/2″	0.303	0.994	1-5/8″	3.200	10.449
13mm	0.318	1.043	1-3/4″	3.712	12.179
14mm	0.368	1.207	45mm	3.807	12.555
9/16″	0.383	1.256	1-7/8″	4.260	13.977
15mm	0.424	1.391	48mm	4.330	14.205
5/8″	0.473	1.551	50mm	4.698	15.414
16mm	0.481	1.578	2″	4.848	15.906
17mm	0.543	1.791	2-1/8″	5.475	17.963
11/16″	0.573	1.880	2-1/4″	6.135	20.128
18mm	0.610	2.001	60mm	6.768	22.205
3/4″	0.682	2.237	2-3/8″	6.838	22.435
			2-1/2″	7.576	24.856
			2-5/8″	8.354	27.409
			2-3/4″	9.169	30.083

Modern Equipments

Expert Engineers

Well Maintained

Efficient Factories

Copper Nickel Bars and Rods Types

Cu-Ni Hex Bar Dealer in Houston, Copper Nickel Alloy Cold Drawn Round bar Supplier in Houston, Copper Nickel Alloy Hex Bar Manufacturer in West Houston, ASTM B151 Copper Nickel Forged Rods Supplier in Texas, Cupronickel Alloy Rectangle Bar Size Chart, Copper Nickel Alloy Solid Rod Price in California, Copper Nickel Square Bars and Rods Supplier in Texas, ASME SB151 Cu-Ni Half Round Bars Stockist in West Houston, Cupronickel Threaded Bar Supplier in Houston

Frequently Asked Questions (FAQ)

What Are The Different Types Of Copper Nickel Bars and Rods Configurations Available?

Copper-nickel bars and rods are available in various configurations, including round, square, hexagonal, and flat shapes. They come in different sizes, lengths, and grades, such as 90/10 and 70/30 Cu-Ni alloys.

Can Copper Nickel Bars and Rods Be Recycled After Use?

Yes, copper-nickel bars and rods are highly recyclable. Their alloys retain valuable properties after recycling, making them an environmentally friendly choice for reuse in various industrial and manufacturing applications.

Are Copper Nickel Bars and Rods Suitable For Hygienic And Sanitary Applications?

Yes, copper-nickel bars and rods are suitable for hygienic and sanitary applications due to their corrosion resistance, antimicrobial properties, and ease of cleaning, making them ideal for food processing and medical equipment.

Copper Nickel Bars and Rods Uses

Copper Nickel Bars and Rods find extensive applications in marine hardware, condenser tubes, seawater piping, offshore oil platforms, and heat exchangers. Their strong resistance to corrosion and biofouling makes them perfect for desalination plants, ship hulls, and naval components. In the power and chemical industries, they are useful in high-temperature and high-moisture environments. Brian Fasteners supplies high-quality Copper Nickel products designed for tough conditions in marine and industrial settings, ensuring long operational life, low maintenance, and reliability in fluid handling systems.

Our Products

Other Products

Other Material

If You Are Looking To Buy High Quality

We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.