Brian Fasteners, with its corporate office in Houston, USA, is a renowned Copper C10200 bars and rods manufacturer and supplier. Having extensive experience in casting and precise finishing, the company delivers excellent quality C10200 products according to strict industry standards. Brian Fasteners‘ manufacturing employs advanced melting and annealing techniques to guarantee every bar provides superior conductivity and mechanical uniformity. Supplying utility, electrical, and manufacturing industries, they merge accurate tolerances with efficient customer service and supply chain reliability. This makes Brian Fasteners a preferred supplier of Copper C10200 bars in the US market, providing consistent solutions tailored to challenging industrial applications.
Copper C10200 or electrolytic copper consists of a minimum of 99.90% purity with low oxygen levels (≤0.04%). The electrical conductivity is close to 100 IACS and thermal conductivity is high. Tensile strength is normally 200–260 MPa, yield strength about 70–100 MPa, and elongation is 30–40%. Due to a good mechanical strength, ductility, and conductivity, it is most suited for forming and machining operations. This alloy‘s performance reliability and workability are ensured by the proper control of chemical composition and thermal treatment during manufacturing.
| Specifications | ASTM B187, ASTM B301 / ASME SB187, SB301 |
| Range | 3.17 MM TO 350 MM DIA |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
| Copper Grades | C10200 |
| Melting Point – Solidus ⁰F | 1981 |
| Melting Point – Liquidus ⁰F | 1981 |
| Density lb/cu in. at 68⁰F | 0.323 |
| Electrical Conductivity % IACS at 68⁰F | 101 |
| Specific Gravity | 8.94 |
| Specific Heat Capacity Btu/lb/⁰F @ 68 ⁰F | 0.092 |
| Thermal Conductivity Btu/sq ft/ft hr/ ⁰F at 68⁰F | 226 |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-392 ⁰F) | 9.6 |
| Modulus of Rigidity ksi | 6400 |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-212 ⁰F) | 9.4 |
| Modulus of Elasticity in Tension ksi | 17000 |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-572 ⁰F) | 9.8 |
| Standards | Country | Value |
|---|---|---|
| EN | Europe | Cu-OF |
| DIN CEN/TS 13388 | Germany | CW008A |
| UNS | – | C10200 |
| JIS | Japan | C1020 |
| GB | China | TU1 |
| BS | England | C102 |
| Thermal Properties | Metric | English |
|---|---|---|
| Annealing Point | >= 371 °C | >= 700 °F |
| CTE, linear | 17.0 µm/m-°C @Temperature 20.0 – 100 °C | 9.44 µin/in-°F @Temperature 68.0 – 212 °F |
| 17.7 µm/m-°C @Temperature 20.0 – 300 °C | 9.83 µin/in-°F @Temperature 68.0 – 572 °F | |
| 17.3 µm/m-°C @Temperature 20.0 – 200 °C | 9.61 µin/in-°F @Temperature 68.0 – 392 °F | |
| Thermal Conductivity | 391 W/m-K @Temperature 20.0 °C | 2710 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
| Melting Point | 1083 °C | 1981 °F |
| Specific Heat Capacity | 0.385 J/g-°C @Temperature 20.0 °C | 0.0920 BTU/lb-°F @Temperature 68.0 °F |
| Property/unit | Condition | Min | Max |
|---|---|---|---|
| Tensile Strength (N/mm2) | 1/2H | 290 | |
| Elongation in 5.65 Cross sectional area | O | 32 | |
| Tensile Strength (N/mm2) | H | 350 | |
| Tensile Strength (N/mm2) | O | 260 | |
| Elongation in 5.65Cross sectional area | 1/2H | 4 |
Yes, Copper C10200 Bars and Rods are fully recyclable. Copper retains its properties after recycling, making it an environmentally friendly and sustainable material for repeated use in various industries.
Copper C10200 Bars and Rods generally do not require corrosion protection coatings as copper naturally resists corrosion. However, in certain aggressive environments, protective coatings may be used to enhance durability.
Yes, Copper C10200 Bars and Rods can be welded using techniques like TIG and MIG welding. Their high conductivity and low oxygen content ensure strong and reliable welds for various applications.
Brian Fasteners’ Copper C10200 bars and rods find a broad spectrum of usage in electrical and industrial applications. These are utilized in the manufacturing of busbars, electrical conductors, terminals, and transformer parts with the advantages of good conductivity and machinability. For heat exchangers and HVAC systems, the thermal efficiency and corrosion resistance of the alloy are appreciated. C10200 is usually employed in artistic, decorative work because of its malleability and finish. It also sustains lighting fixtures, special connectors, and mechanical components with uniform performance. Brian Fasteners guarantees high-quality copper bars that satisfy precision and endurance requirements in manufacturing, energy, and architectural applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
