Carbon Steel EN-45 Bars

Brian Fasteners distributes Carbon Steel EN-45 Bars from Houston, an engineering steel with high tensile strength medium carbon, heat treated for structure and mechanics purposes. EN-45 bars are to BS 970 and ASTM specifications with mill test certification and traceability of material. With tight tolerance specifications and quality assurance, we offer consistent stock for parts requiring high tensile strength and wear resistance.

Carbon Steel EN-45 Rods Dealer in West Houston, Carbon Steel EN-45 Bars Manufacturer in West Houston, Carbon Steel EN-45 Square Bars Supplier in Texas, Carbon Steel EN-45 Flat Bars Price List in Houston, Carbon Steel EN-45 Rectangular Bars Supplier in California, Carbon Steel EN-45 Bars Price List in Texas, Carbon Steel EN-45 Round Bars Weight Calculator Exporter Stockist in Houston.

Carbon Steel EN-45 Round Bars

Carbon Steel EN-45 Hex Bars

Carbon Steel EN-45 Series Rods

What is Carbon Steel EN-45 Series Bars ?

EN-45 has ~0.44–0.54% carbon, 0.60–0.90% manganese, with small amounts of P and S. Its tensile strength after hardening and tempering is approximately 700–850 MPa, while its yield strength is approximately 450–600 MPa. It possesses good wear resistance, fatigue life, and moderate ductility.

Carbon Steel EN-45 Rods Exporter in USA, Carbon Steel EN-45 Round Bars Stockist in Houston, Carbon Steel EN-45 Hex Bars Supplier in USA, Carbon Steel EN-45 Cold Drawn Round Bars Distributor in Texas, Carbon Steel EN-45 Rods Stockist California Carbon Steel EN-45 Rods Price in California, Carbon Steel EN-45 Round Bars Price List, Carbon Steel EN-45 Rectangular Bars Supplier in Texas, Carbon Steel EN-45 Bars DimEN-8sions in USA.

Carbon Steel EN-45 Bars Specifications

Grade	EN45
Specification	BS970 1.0904 55Si7 55S6 55Si2Mn ASTM 9255
Round bar size	Diameter: 3-~800mm
Hex Bar size	2-100mm A/F
Flat bar size	Thickness: 2 -100mm
Flat bar size	Width: 10 to 500mm
Square bar size	4 to 100mm
Angle bar size	3mm20mm20mm~12mm100mm100mm
Section	3.0 to 12.0mm thickness
Channel Bar	80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID)
Billet Size	1/2″ to 495mm Diameter
Rectangles Size	33 x 30mm to 295 x 1066mm
Finish	Cold (bright) drawn, centreless ground,smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Surface	Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Condition	Hardened & tempered, annealed
Technique	EN45 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Processing	Bar cutting to 650mm
Form	EN45 Welding Rod, Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.
Our EN45 round bar conforms to NACE MR0175/ISO 15156

Chemical Compositions of Carbon Steel EN-45 Bars

Element	En42J
C	0.75 – 0.90%
Mn	0.50 – 0.90%
Si	0/1 – 0.35
S	0.04% Max
P	0.04% Max

Mechanical Properties of Carbon Steel EN-45 Bars

ULTIMATE TENSILE STRENGTH, S. (MPA)	621
Modulus of elasticity, E (Gpa)	204
Fatigue strength coefficient, of (Mpa)	948
Fatigue strength exponent, b	-0.092
Fatigue ductility coeffient ,ef	0.26
Fatigue ductility exponent,c	-0.445

You Need Our Support, to Have Any Projects?

Test Certificate

Why George Metals?

Packaging

Modern Equipments

Expert Engineers

Well Maintained

Efficient Factories

Carbon Steel EN-45 Bars Types

Stockist of Carbon Steel EN-45 Round Bars in Houston, Carbon Steel EN-45 Bars Supplier in USA, Carbon Steel EN-45 Rods Price List in Houston, Carbon Steel EN-45 Rectangular Bars Supplier in Houston, Carbon Steel EN-45 Hexagonal Bars Exporter in West Houston, Carbon Steel EN-45 T-Bars Exporter in USA, Carbon Steel EN-45 Cold Rolled Rods Exporter in Texas, Carbon Steel EN-45 Round Bar Manufacturer in California, Carbon Steel EN-45 Round Bars Distributor in USA, Carbon Steel EN-45 Polished Rods Dealer in West Houston

size chart Carbon Steel EN-45 Bars

Type	SIZES (mm)	SIZES (Inches)	ISO Tolerance
Cold Drawn and Polish	3.00 – 75.00	1/8″ – 3.00″	h8-h9-h10-h11
Cold Drawn and Ground	10.00 – 75.00	5/6″ – 2.50″	h8-h9-h10-h11
Peeled and Polished	40.00 – 150.00	1.50″ – 6.00″	h11, h11-DIN 1013
Peeled and Ground	20.00 – 50.00	3/4″ – 2.00″	h9-h10-h11

Frequently Asked Questions (FAQ)

What are the main uses of Carbon Steel EN-45 Bars and Rods?

EN-45 Bars and Rods are primarily used in automotive components like springs, shafts, and crankshafts, as well as in engineering tools and machinery parts requiring high strength and wear resistance.

What are the mechanical properties of EN-45 Bars and Rods?

EN-45 Bars and Rods offer excellent tensile strength (700-900 MPa), yield strength (450-600 MPa), and toughness, making them ideal for high-stress applications.

Can Carbon Steel EN-45 Bars and Rods be customized?

Yes, we offer customized Carbon Steel EN-45 Bars and Rods in various sizes and specifications to meet specific application needs.

Carbon Steel EN-45 Bars Uses

EN-45 bars are applied in axles, shafts, gears, bushes, dowels, and fasteners where there is a need for strength and wear resistance. Suitable for clutch shafts, machine tool components, cam followers, and intermediate shafting. Brian Fasteners supplies cut-to-length and heat-treated EN-45 bars to the mechanical engineering, agricultural, and automotive markets.

Our Products

Other Products

Other Material

If You Are Looking To Buy High Quality

We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.