Brian Fasteners offers Aluminium 1070 Bars and Rods suitable from Houston for its high purity and superior conductivity. With ≥99.7% Al, 1070 is suitable for electrical, chemical, and thermal uses. It‘s ductile, soft, and highly formable, making it perfect for deep drawing and welding. Supplied as per ASTM B211, we offer different diameters, tempers, and finishes, all to ensure uniform quality for electrical conductors, chemical equipment, and general manufacturing.
≥99.7% Al with trace Fe and Si. Tensile ~90 MPa, yield ~35 MPa; very good elongation. Non-heat-treatable, strengthened by cold work. Electrical conductivity ~62% IACS, non-magnetic and resistant to corrosion.
| Bar Wire Standard | ASTM B221, B211, B565, B316, AMS 4121 2014 |
| Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Tempers | Tempers range from dead soft annealed to ultra spring temper |
| Rolled Flat Bars Condition | Hardened & tempered, annealed |
| Cold Rolled Bar Technique | Stainless Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Grade | Fe | Si | Mg | Mn | Cu | Zn | Ti | Al |
| Aluminium 1070 | 0.25 | 0.2 | 0.03 | 0.03 | 0.03 | 0.07 | 0.03 | 99.70 |
| Grade | Density (×1000 kg/m3) | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Reduction in Area (%) |
| Aluminium 1070 | 7.7-8.03 | 640 | 495 | 10 | 45 |
| STANDARD | WERKSTOFF NR. | UNS |
| Aluminium 1070 | 3.0275 | A91070 |
Yes, Aluminum 1070 bars are corrosion-resistant due to their high purity, offering good resistance to atmospheric and chemical corrosion. However, they may be less resistant than alloyed aluminum grades.
Aluminum 1070 rods are typically sized by diameter, ranging from small diameters like 6mm to larger sizes of up to 150mm or more, with lengths commonly ranging from 1 to 6 meters.
To maintain Stainless Aluminium 1070 Bar, clean it regularly with mild detergent and water, avoid harsh chemicals, inspect for corrosion or scratches, and ensure proper storage to prevent physical damage.
Optimal for transformer windings, bus bars, cable sheathing, and heat exchangers. Applied in storage/chemical tanks, reflective surfaces, kitchenware, and HVAC components. Its purity allows it to be used in aerospace ground equipment and food-safe containers. Brian Fasteners ensures every rod meets standards for conductivity, formability, and safety-critical applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
