Brian Fasteners provides Aluminium 1050 Bars and Rods, a commercial-purity alloy with ≥99.5% aluminum, from Houston, USA. Renowned for excellent workability, electrical/thermal conductivity, and resistance to corrosion, 1050 is best suited for forming-intensive applications. Supplied per ASTM B211 in a range of batons and tempers, these rods are best for clients demanding pure, easy-to-fabricate aluminum stock for industrial, decorative, or electrical purposes.
≥99.5% Al, very little impurities. Tensile ~60–120 MPa and yield ~30 MPa. High moldability and reflectivity; non-heat-treatable. Conductivity and formability are key strengths; poor machinability.
| Bar Wire Standard | ASTM B221, B211, B565, B316, AMS 4121 2014 |
| Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Tempers | Tempers range from dead soft annealed to ultra spring temper |
| Rolled Flat Bars Condition | Hardened & tempered, annealed |
| Cold Rolled Bar Technique | Stainless Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Grade | C | Mn | Si | Cu | Fe | Zn |
| 1050 | 0.05 max | 0.1 max | 0.30 max | 0-0.05 | 0-0.4 | 0-0.07 |
| UTS (Mpa) | Yield Strength (Mpa) | Elongation |
| 95 | 20 Min | 23 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS |
| EN AW-1050 A | 3.0255 | A91050 | S1B |
Yes, Aluminium 1050 bars are corrosion-resistant due to their high aluminum content (99.5%). They offer excellent resistance to corrosion in atmospheric conditions and chemical environments, making them suitable for various applications.
Yes, Aluminium 1050 rods can be customized in size and length based on specific requirements. Manufacturers often offer tailored dimensions to meet diverse industrial and commercial needs.
To maintain a Stainless Aluminum 1050 bar, clean it regularly with a soft cloth and mild detergent, avoid abrasive cleaners, store in a dry environment, and inspect for corrosion or damage.
Applied in reflectors, electrical appliances, food packaging, architectural trim, and show components. Used in chemical storage, signage, HVAC ducts, and decorative panels. Selected for purity, forming ease, and surface quality. Brian Fasteners distributes finish-ready rod for design-sensitive and conductive applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
George Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 George Metals. All rights reserved
